1. One component polyurethane waterproof coating. This Qingdao waterproof coating is a reactive flexible waterproof coating made of isocyanate and polyether as the main raw materials and various additives.

特点：材料奔上有着高强度、高延伸率、高固含量、粘结力强的优势，在常温的环境下施工，自然流平，可以克服基层开裂带来的渗漏情况。但这种材料对施工的要求比较高，在施工之前需要进行测试，确保地面平整、干净，含水率低于8%。

Features: the material has the advantages of high strength, high elongation, high solid content and strong adhesion. It can be constructed under normal temperature and leveled naturally, which can overcome the leakage caused by base cracking. However, this material has high requirements for construction. Before construction, it needs to be tested to ensure that the ground is flat and clean, and the moisture content is less than 8%.

青岛防水涂料

Qingdao waterproof coating

2、JS复合防水材料。是通过引进先进的技术和关键原料，由液料和无机粉料复合制成的双组份防水材料。

2. JS composite waterproof material. It is a two-component waterproof material made of liquid material and inorganic powder by introducing advanced technology and key raw materials.

特点：对施工环境没有什么要求，涂层也是牢固结实，环保性能高。多用于建筑桥梁、道路的防水，在-35℃~140℃还可以与水泥砂浆等材料牢固粘结。

Features: there are no requirements for the construction environment, and the coating is firm and strong with high environmental protection performance. It is mostly used for waterproofing of bridges and roads. It can also be firmly bonded with cement mortar and other materials at - 35 ℃ ~ 140 ℃.

3、丙烯酸酯防水涂料。是通过纯丙烯酸酯共聚物或是纯丙酸酯乳液，在里面加入适量的填料、助剂配置而成，属于是合成树脂类单组分防水涂料。

3. Acrylate waterproof coating. It is made of pure acrylate copolymer or pure propionate lotion, in which an appropriate amount of fillers and additives are added. It is a synthetic resin one component waterproof coating.

特点：这种材料可以在潮湿的环境下进行施工，有着很好的透气性，耐气候性，耐热性和耐紫外线性也很强。即便是在零下30℃~80℃的范围内，性能也不会出现什么变化，良好的延伸性，让它更能适应基面一定幅度的开裂变形。

Features: this material can be constructed in a humid environment, with good air permeability, weather resistance, heat resistance and UV resistance, and strong linearity. Even in the range of minus 30 ℃ ~ 80 ℃, the performance will not change. The good extensibility makes it more suitable for a certain range of cracking and deformation of the base surface.